Semi-automatic
Press the "Start" button once to process once. After the product is processed, the machine head is connected at the highest position one after another, and it works to the starting point. Replace the product, press the "Start" button again, work to the first hole position, and process it again, or start processing from the Nth hole to the last hole, N can be set, you can enter the hole number through the keyboard, and press Hole, press the key to work to the hole, make sure that the hole must not have been processed, and then press the "Start" button to process, otherwise the needle will be damaged. When there is a protection, the processing method is the same as that of automatic processing.

Fully automatic
After inputting the product data, press the "Up Hole" or "Down Hole" button on the fully automatic test machine screen to complete the single-step hole alignment, and you can check whether the hole orientation is wrong. If it is wrong, you can exit and enter Modify under the experience modification interface. After pressing start, the workbench will continue to move until the continuous work of a product program file is completed, so that it can be checked whether the workbench is normal.